Pivot

To verify model specific fitment, click here for our Riser Fitment Chart.

Products: 15 of 5
  • PowerMadd Narrow Pivot Riser with Bolts and Clamps - 45720 thru 45790

    PowerMadd's latest pivot risers use a modern design that is both durable and light weight.  All mounting hardware is included (4 caps and 8 bolts) making it a direct OEM replacement.  Designed with cut outs on the top and bottom to allow wires to be routed through the inside of the riser. Designed to fit any snowmobile with a (3-3.5”) wide T-style steering post. Includes 4 handlebar caps and 8 bolts. Extended throttle and brake lines may be required with taller risers. See our riser fitment chart for details.

    - Light weight

    - Modern design

    - Machined from T-6061 aluminum

    - Anodized for corrosion resistance

    - Laser etched logos

    - Works on Ski Doo G4 Chassis sleds

    To verify fitment click here for our Riser Fitment Chart.

    Note: DOES NOT work with PowerMadd Pivot Adapter.

    Click Here - Installation Instructions

    Not rated yet
    • $50.00
    Only 1 left in stock
  • PowerMadd Wide Pivot Riser with Bolts and Clamps - 45820 thru 45890

    PowerMadd's latest pivot risers use a modern design that is both durable and light weight.  All mounting hardware is included (4 caps and 8 bolts) making it a direct OEM replacement.  Designed with cut outs on the top and bottom to allow wires to be routed through the inside of the riser. Designed to fit any snowmobile with a (4-4.5”) wide T-style steering post. Includes 4 handlebar caps and 8 bolts. Extended throttle and brake lines might be required with taller risers. See our riser fitment chart for details.

    - Light weight

    - Modern design

    - Machined from T-6061 aluminum

    - Anodized for corrosion resistance

    - Laser etched logos

    To verify fitment click here for our Riser Fitment Chart.

    Note: will work with PowerMadd Pivot Adapters.

    Click Here - Installation Instructions

    Not rated yet
    • $50.00
    Only 2 left in stock
  • Pivot Riser Blocks - 45527 thru 45541

    PowerMadd Pivot Syle Riser Blocks

    PowerMadd Pivot Style Riser Blocks are designed to be used as replacements for stock pivoting risers or in conjuction with a PowerMadd Pivot Adaptor for snowmobiles with a flat top steering posts.  If your sled has a "T" post and a pivoting style stock riser you can easily raise your bars by replacing the stock riser with a longer PowerMadd pivot riser. The PowerMadd Pivot Style Riser is tapped so that is works with your stock handlebar clamps and existing bolts. 

    Note - Yamaha snowmobiles require a PowerMadd Yamaha Pivot Adaptor - 45583

    To verify fitment click here for our Fitment Chart.

    Click Here - Installation Instructions

    Not rated yet
    • $55.00
  • PowerMadd Narrow Pivot Riser - 45572 thru 45579

    These risers are designed to be taller replacements for the narrower stock riser that comes on some Arctic Cat, Polaris and Yamaha models. Measure your stock riser, if it is 3.125" wide this is your replacement riser.

    May require additional clamps and/or bolts depending on application.

    To verify fitment click here for our Riser Fitment Chart.

    Note: will not work with PowerMadd Pivot Adapter.

    Not rated yet
    • $45.00
    Out of stock
  • Oversized Bar Clamp (1 1/8) - 44257

    Oversized Bar Clamp
    Universal adaptor allows 1 1/8" bars to be clamped to ATV's, motorcycles and snowmobiles with PowerMadd Pivot Riser Blocks. Fits ATVs, motorcycles, snowmobiles and riser blocks with front to back spacing between 1.197" and 1.38" center to center. 

    Will raise bars 1/4" when existing application does not have a bottom clamp. Will raise bars 3/4" when used with pivot risers or steering posts with built in bottom clamp.

    To verify fitment click here for our Riser Fitment Chart.

    Click Here - Installation Instructions

    Not rated yet
    • $55.00
    Out of stock

Bestsellers