12 DC Volt USB cell Phone Charger - 66000-1

Not rated yet
0

How many times have you been out on the trail and your phone dies because of searching for a signal or the cold temperatures? PowerMadd has an inexpensive solution! Our 12 DC Volt Cell Phone Charger installs easily to any machine with a 12-volt battery. The charger has a replaceable 2-amp in-line fuse and a micro USB connector. The charger will work with most Android, iPhone and Windows phones (iPhone requires adapter - NOT INCLUDED).

- Requires 12 DC volts
- Micro USB connector
- 2-amp in-line fuse for system protection
- Installs easily
- Compatible with most Android, Windows phones and iPhones(requires adapter).

Fitment: Fits any ATV, Motorcycle, Snowmobile or UTV with a 12 volt battery.

Length: 8 ft. 10 in.

Note: This cell phone charger can only be powered by a 12 volt DC battery. If connected to an AC electrical system, damage to the cell phone may result.

iPhone 4 users: A micro usb to 30 pin adapter is required.

iPhone 5, 6, 7, 8, 10 (X), 11 users: A micro usb to lightning port adapter is required.

Samsung Galaxy S7, S8, S9, S10 users: If you are having a charging issue, please contact PowerMadd for a replacement cable. 651.462.8465

Installation Instructions

NOTE: This cell phone charger, like all cell phone chargers hooked to your car cigarette lighter will discharge your battery at a very small rate even when not connected to a phone.  If your machine is to be sitting for longer than two weeks we suggest disconnecting the cell phone charger from the power source.  To eliminate this problem the cell phone charger can be connected to a keyed power source.  We can send you T-taps connectors at no charge and instructions to do this.  Email techsupport@powermadd.com

  • $30.00
This item is out of stock

How many times have you been out on the trail and your phone dies because of searching for a signal or the cold temperatures? PowerMadd has an inexpensive solution! Our 12 DC Volt Cell Phone Charger installs easily to any machine with a 12-volt battery. The charger has a replaceable 2-amp in-line fuse and a micro USB connector. The charger will work with most Android, iPhone and Windows phones (iPhone requires adapter - NOT INCLUDED).

- Requires 12 DC volts
- Micro USB connector
- 2-amp in-line fuse for system protection
- Installs easily
- Compatible with most Android, Windows phones and iPhones(requires adapter).

Fitment: Fits any ATV, Motorcycle, Snowmobile or UTV with a 12 volt battery.

Length: 8 ft. 10 in.

Note: This cell phone charger can only be powered by a 12 volt DC battery. If connected to an AC electrical system, damage to the cell phone may result.

How many times have you been out on the trail and your phone dies because of searching for a signal or the cold temperatures? PowerMadd has an inexpensive solution! Our 12 DC Volt Cell Phone Charger installs easily to any machine with a 12-volt battery. The charger has a replaceable 2-amp in-line fuse and a micro USB connector. The charger will work with most Android, iPhone and Windows phones (iPhone requires adapter - NOT INCLUDED).

- Requires 12 DC volts
- Micro USB connector
- 2-amp in-line fuse for system protection
- Installs easily
- Compatible with most Android, Windows phones and iPhones(requires adapter).

Fitment: Fits any ATV, Motorcycle, Snowmobile or UTV with a 12 volt battery.

Length: 8 ft. 10 in.

Note: This cell phone charger can only be powered by a 12 volt DC battery. If connected to an AC electrical system, damage to the cell phone may result.

iPhone 4 users: A micro usb to 30 pin adapter is required.

iPhone 5, 6, 7, 8, 10 (X), 11 users: A micro usb to lightning port adapter is required.

Samsung Galaxy S7 users: If you are having a charging issue, please contact PowerMadd for a replacement cable. 651.462.8465

Installation Instructions

NOTE: This cell phone charger, like all cell phone chargers hooked to your car cigarette lighter will discharge your battery at a very small rate even when not connected to a phone.  If your machine is to be sitting for longer then two weeks we suggest disconnecting the cell phone charger from the power source.  To eliminate this problem the cell phone charger can be connected to a keyed power source.  We can send you T-taps connectors at no charge and instructions to do this.  Email techsupport@powermadd.com

iPhone4 users: A micro usb to 30 pin adapter is required.

iPhone5 users: A micro usb to lightning port adapter is required.

Samsung Galaxy S7, S8, S9, S10 users: If you are having a charging issue, please contact PowerMadd for a replacement cable. 651.462.8465

Installation Instructions

NOTE: This cell phone charger, like all cell phone chargers hooked to your car cigarette lighter will discharge your battery at a very small rate even when not connected to a phone.  If your machine is to be sitting for longer than two weeks we suggest disconnecting the cell phone charger from the power source.  To eliminate this problem the cell phone charger can be connected to a keyed power source.  We can send you T-taps connectors at no charge and instructions to do this.  Email techsupport@powermadd.com

    • Weight
      1 lbs
    • SKU
      66000
  • Accessories
    Replacement Wire - 66001, Cell Phone Charger - 66000
  • Manufacturers
    • Manufacturer
      E3 Spark Plugs
Customer reviews
There are no comments yet. Be the first to leave a comment
Please sign in to add review